BMW E30 Cabrio Tuning
In the U.S., the BMW E30 Cabrio Tuning 318i Convertible with the four-valve engine was delivered M42 (construction period 07/90-12/92). To make the rigid BMW E30 Cabrio Tuning, the sill and the window frames were reinforced.After 15 years without a convertible in the BMW model range was introduced at the IAA 1985, the open BMW E30 Cabrio Tuning 325i. Later, rounded out the 320i (1987) and the 318i (1990), the Convertible range at the bottom. In September 1988 appeared the BMW E30 Cabrio Tuning M3 convertible, which was between 06/88 and 06/91 only 786 were ever made.
BMW E30 Cabrio Tuning
This BMW E30 Cabrio Tuning increased the weight of the vehicle to open about 125 kg compared to its counterpart closed. The fabric roof could also be electrically if desired (the BMW E30 Cabrio Tuning M3 convertible electro-hydraulic) sunk and disappeared under a flat roof flap. Also available was a hardtop, BMW, and a body-color hardtop coatable the Wiesmann company.
BMW E30 Cabrio Tuning
In the BMW E30 Cabrio Tuning six-cylinder versions from 320i were from the body-side model of care for the 1991 model bumpers and door mirrors finished in body color.
BMW E30 Cabrio Tuning
The BMW E30 Cabrio Tuning M3 was first used as a base vehicle for homologation in Group A and was one of the most successful racing touring car of all time, as in the DTM. The vehicle was developed by BMW E30 Cabrio Tuning M GmbH, a subsidiary of BMW developed and produced.
No comments:
Post a Comment